Open now — 24 hours a day, 7 days a week Family owned & operated in Spanaway since 1998

Lowboy Towing in Spanaway

Low-deck transport for tall and heavy equipment.

Call 253-846-1164 Open 24 hours · 7 days
Lowboy Towing – Emerald Towing in Spanaway, WA

What Lowboy Towing Means and When It’s the Right Call

A lowboy is a trailer with a deck that sits very close to the ground. It moves loads that are too tall or too heavy for a regular tow truck or flatbed. If your load is a normal car or pickup, a lowboy is more than you need. If it’s a big machine or a tall piece of equipment, it’s usually the safest way to move it.

Lowboy towing is about one simple idea. The trailer has to fit the load, not the other way around.

We’re Emerald Towing, a family-owned towing company serving Spanaway and the rest of Pierce County since 1998. When someone calls us about a big or tall load, the first thing we want to know is what we’re moving. That one answer tells us whether a lowboy is the right tool.

So what is a lowboy? It’s a trailer with a deck that drops down low, close to the road. Most trailers sit up higher, on top of the wheels. A lowboy’s deck sits down between them.

That low deck does a few big jobs:

  • Height: It keeps tall loads shorter overall, so there’s more room under bridges, power lines, and overpasses.
  • Stability: It keeps heavy loads closer to the ground, so the load stays steadier on curves and hills.
  • Loading: Machines can often drive up a short ramp instead of a steep one.

Here’s when a lowboy is usually the right call:

  • Construction machines like excavators, dozers, loaders, and backhoes.
  • Tall equipment that would stand too high on a regular flatbed.
  • Heavy loads that are too much for a standard tow truck to carry safely.
  • Equipment moving between job sites, yards, or storage.

Picture this. You’ve got a mini excavator on a lot off Mountain Highway, and it needs to get to a job across the county. On a regular flatbed, the arm and cab might ride too high. On a lowboy, the same machine sits lower and rides more steadily.

Now for the honest part. A lot of people don’t need a lowboy at all. If you’re moving a car, an SUV, a pickup, or a motorcycle, a lowboy is overkill. Flatbed Towing or Light Duty Towing will handle it just fine, and you won’t be paying for more truck than the job calls for.

Some loads fall in the middle. A box truck, a bus, or a broken-down semi often needs Heavy Duty Towing instead, because those vehicles can be towed on their own wheels. A lowboy makes more sense for things that don’t roll well on their own, or that stand too tall to haul any other way.

Not sure which one you need? That’s okay. Most folks aren’t. Tell us what the equipment is, roughly how big it is, and where it’s going. We’ll help you figure out if a lowboy fits or if something simpler will do. Getting this right up front matters. The right trailer means a safer trip, fewer surprises on the road, and a load that shows up the way it left.

Signs Your Equipment Needs a Lowboy Instead of a Standard Flatbed

A flatbed works great for a lot of loads. But equipment that already stands tall, weighs more than it looks, runs on tracks, sits low, is wide or oddly shaped, or has to be taken apart to fit is a good sign you need a lowboy.

Here’s what to look for:

  • It already stands tall on the ground: A flatbed deck rides several feet off the road. Whatever height your machine has, the deck adds to it. If the cab, boom, or arm is already close to head height or taller, that extra lift can push the whole load too high for bridges, overpasses, and power lines. A lowboy keeps the deck low, so the same machine rides shorter.
  • It’s heavier than it looks: Compact equipment can fool you. A small excavator or skid steer can weigh a lot more than a pickup. Every flatbed has a weight it’s built to carry. When a machine gets close to that number or goes over it, the trip gets risky. Lowboys are built for heavier loads.
  • It runs on tracks, not tires: Tracked machines can’t be towed on their own wheels. They have to be carried. A steep tilted flatbed deck can be a tough climb for steel or rubber tracks. A lowboy’s shorter ramp angle makes loading much easier.
  • It sits low or hangs long: Some equipment has low ground clearance or a long front or back end. On a steep loading angle, the belly or ends can drag or catch. If you’ve ever watched a machine scrape on the way up a ramp, a lowboy is worth a look.
  • It’s wide or oddly shaped: Wide buckets, blades, outriggers, and attachments that don’t come off easily can make a load hard to secure on a narrow deck. A lowboy gives more room to center the weight and strap it down well.
  • Someone says you’ll have to take it apart: If a hauler tells you to pull off a bucket, lower a cab, or remove parts just to make it fit on their truck, that’s a sign the truck doesn’t fit the job. The trailer should fit the load.

Height and weight matter for more than balance, too. There are legal limits on how tall, wide, and heavy a load can be on public roads. Oversize loads can need special permits. Keeping a load lower and better balanced helps it stay within those limits and makes for a safer trip.

Before you call, it helps to gather a few details. You don’t need exact numbers. Close is fine.

  • Machine: The make and model
  • Weight: Often on a plate on the machine or in the owner’s manual
  • Size: About how tall and how wide it is
  • Running gear: Whether it runs on tracks or tires, and whether it runs at all
  • Attachments: Any that stay on
  • Pickup spot: A paved lot, a muddy job site, or a tight driveway

That last one matters more than people think. A machine parked on soft ground or tucked behind a building can change how it gets loaded. The more you can tell us, the easier it is to match the right trailer to your equipment the first time.

Common Reasons Spanaway Job Sites Call for Lowboy Transport

Most lowboy calls start with a job that’s changing. A machine is done in one spot and needed in another, it broke down and can’t move itself, it’s stuck in the mud, it was bought or sold, or it’s heading into storage.

Here are some common reasons crews, contractors, and equipment owners around Spanaway reach out.

Moving a machine to the next job. Your crew wraps up site work on one lot, and the excavator needs to be across the county by Monday. Driving a tracked machine down Mountain Highway isn’t really an option. It’s slow, it can chew up pavement, and it’s not safe in traffic. A lowboy carries it there in one trip.

A machine quits in the middle of a job. Hydraulic trouble, an engine problem, or a thrown track can stop a machine cold. Now it needs to get to a repair shop, and it can’t drive itself onto anything. A dead machine has to be winched up onto the deck, and a lower deck makes that pull a lot easier and safer.

It’s stuck in the mud. Pierce County gets plenty of rain, and a job site that was firm in August can turn soft fast in the wet months. A loader or skid steer can sink in and stay put. Getting it out is a job for our Winch Out Service or Off-Road Vehicle Recovery. Once it’s free, a lowboy is often how it leaves the site.

You bought, sold, or rented equipment. Maybe you found a used dozer from a seller a few towns over. Maybe you’re returning a rental, or you sold a backhoe and the buyer needs it delivered. Either way, the machine has to get from one owner to the next without a scratch.

A big project at home. It’s not only contractors. A property owner might rent a mini excavator to clear brush, dig a drainage line, or prep a spot for a shop. When the work’s done, that machine still has to get home or back to the rental yard.

Putting equipment away for a while. When a project ends or work slows down, machines often head to a storage yard. The same goes for pulling them back out when the next job starts.

Some job site loads aren’t machines that dig. If you need to move a lift or a site office, we also offer Scissor Lift Towing, Office Container Transport, and Shipping Container Transport.

Each of these comes back to the same question. What are we moving, and what trailer fits it? A stuck loader on wet ground, a broken excavator, and a rental mini excavator are all different jobs. Knowing which one you’ve got helps us show up with the right setup.

How Lowboy Transport Pricing Works

There’s no single price for lowboy transport. Most haulers charge by the hour, by the mile with a base fee, or a flat rate for a set trip. Distance, size and weight, permits, loading conditions, wait time, and timing all move the number.

Every load is different, so every quote is built around the job. That might sound vague, but it works in your favor. You pay for the move you need, not a one-size-fits-all number. Many haulers also have a minimum charge.

Whatever the model, the same things tend to move the price up or down:

  • Distance: A move across Spanaway costs less than a trip to the other side of the state.
  • Size and weight: Bigger, heavier machines may need a larger truck and trailer, and more care to secure.
  • Oversize needs: If the load needs the special permits we talked about earlier, those costs get added in. Some very large loads also need a pilot car to travel with them.
  • Loading conditions: A running machine on a flat, paved lot loads fast. A dead machine on a muddy site, or one tucked behind a building, takes more time and more work.
  • Wait time: If the truck has to sit while a site gets cleared or a gate gets unlocked, that time usually counts.
  • Timing: Night, weekend, and holiday calls can cost more with some haulers.
  • Prep work: Removing attachments or extra rigging adds labor.

Here’s a simple example. Two people call about a mini excavator. One has it running on a gravel pad, going a few miles. The other has one that won’t start, sunk in a soggy field, headed to a shop out of town. Same kind of machine, two very different jobs. The second one will cost more, and it should.

That’s why the details you gather before calling matter so much. Better information means a more accurate quote, and fewer surprises when the bill comes.

Before you hire anyone for a lowboy move, it’s smart to ask a few questions:

  • Is this price by the hour, by the mile, or flat?
  • Is there a minimum charge?
  • Does the quote include loading, unloading, and securing the load?
  • Are permit or pilot car costs included, or extra?
  • What happens to the price if the job takes longer than planned?
  • Is there an extra charge for after-hours or weekend service?

A good hauler won’t mind any of these. If someone dodges them or gives a number that seems too low to be real, take that as a warning sign. Hidden fees tend to show up at the end.

We believe in fair pricing and clear communication. When you tell us what you’re moving and where it’s going, we’ll walk you through what goes into the cost before the job starts. That way you know what you’re paying for and why.

What Happens During Pickup, Transport, and Delivery

A lowboy move has three parts: loading, the drive, and unloading. The machine is driven or winched on, centered, and chained at several points. The driver plans around low bridges and weight limits, checks the chains along the way, and unloads in reverse at a firm, level spot.

Knowing what each part looks like helps you plan your day. It also makes it easy to tell when a hauler is doing the job right.

At pickup, the first thing a lowboy needs is room. A truck and lowboy trailer together are long, so the driver needs space to pull in, line up, and set the ramps down. A tight driveway or a crowded job site can slow things down before the machine even moves.

Next, the machine goes onto the deck. If it runs, it’s driven up slowly and carefully. If it doesn’t run, it gets winched on. Either way, it should end up centered on the trailer so the weight is balanced. Buckets and blades are lowered flat, and the machine is chained down at several points so it can’t shift.

You can make pickup go a lot smoother with a little prep:

  • Have someone on site who knows the machine and has the keys.
  • Clear a path wide enough for a long truck and trailer to pull in and turn around.
  • Move parked cars and unlock any gates ahead of time.
  • Point out soft ground, low wires, or anything buried, like septic or water lines.
  • Close doors and windows, and take tools and loose items out of the cab.
  • Snap a few photos of the machine from every side before it’s loaded.

During the drive, a loaded lowboy doesn’t move like a pickup. It goes slower, takes wider turns, and needs more room to stop. A careful driver plans around low bridges, tight corners, and roads with weight limits, along with any permit rules we covered earlier.

Chains can settle and loosen as a load bumps along. That’s why careful haulers stop to check them during the trip, especially on longer runs. It’s a small step, and it keeps a big problem from happening.

At delivery, the steps happen in reverse. The drop-off spot should be firm and as level as you can get it. Soggy ground is just as much trouble at the end of a trip as at the start. Make sure someone is there to meet the truck and show the driver exactly where the machine should go.

Before the driver leaves, take a quick walk around your equipment. Compare it to the photos you took at pickup. If something doesn’t look right, it’s much easier to sort out right then than a week later.

That’s really what a good lowboy move comes down to. The trailer fits the load, the load stays put, and your equipment shows up the way it left. Our family has run Emerald Towing since 1998, and protecting what we haul from pickup to delivery is a big part of how we work. We’re here 24/7 when you need to move something big. Call us at 253-846-1164.

Frequently asked questions

Can a lowboy move equipment that doesn't run anymore?

Yes. A machine that won't run gets winched up onto the deck instead of driven, and a lowboy's lower deck makes that pull easier and safer. Tell us it doesn't run when you call so we plan for it.

Do I need a permit to move heavy equipment on a lowboy in Spanaway?

It depends on the load. Loads over the legal height, width, or weight limits for the road can need an oversize permit, and some very large loads also need a pilot car. Give us the machine's weight, height, and width, plus both addresses, and we'll help you sort out whether a permit applies.

What if my equipment is stuck in mud, not just broken down?

Then it needs to be pulled free before it can be loaded. That's a job for our winch out or off-road recovery service. Once it's on firm ground, it can go on the lowboy. Tell us how deep it's sunk and what the ground is like.

How long does loading equipment onto a lowboy usually take?

It depends on the machine and the site. A running machine on a flat, paved lot loads fast. A dead machine on soft ground, or one tucked behind a building, takes longer because it needs more setup. Clearing the path and having someone with the keys on site helps it go quickly.

Stranded right now?

253-846-1164
Call 253-846-1164 · 24/7

Share with