Open now — 24 hours a day, 7 days a week Family owned & operated in Spanaway since 1998

Special Load Transport in Spanaway

Unusual and oversized loads planned and hauled.

Call 253-846-1164 Open 24 hours · 7 days
Special Loads – Emerald Towing in Spanaway, WA

What Counts as a Special Load

A special load is anything that doesn’t fit neatly into a normal tow. It might be too tall, too wide, oddly shaped, top-heavy, or not built to roll at all. Moving it safely comes down to knowing its size, weight, and lift points, and matching it to the right truck or trailer.

Most of what we haul has a clear category. Cars go on a flatbed. Semis go behind a heavy wrecker. Excavators ride a lowboy. Then there are the jobs that don’t fit any of those boxes. That’s what special load transport is for.

Here are the kinds of loads people call us about:

  • Machinery and shop equipment: Generators, air compressors, welders, presses, and other heavy equipment that has to leave one building and get to another.
  • Tanks and large containers: Water tanks, fuel tanks that have been emptied and cleaned, and bulk storage bins.
  • Farm and landscape equipment: Tractors, implements, mowers, and attachments that aren’t road-ready.
  • Small structures: Prebuilt sheds, small portable buildings, and skid-mounted units, depending on size and construction.
  • Vehicles that aren’t street legal: Race cars, project cars, side-by-sides, ATVs, golf carts, and forklifts.
  • Signs, frames, and fabricated pieces: Long, awkward items that need careful support so they don’t bend or crack.
  • Salvage and recovered items: Things that came out of a field, a barn, or a job site and need to go somewhere else.

We’ll be honest about what we can move. Not every special load fits our equipment, and some jobs need a crane company, a rigging crew, or a specialized heavy hauler. If yours is one of those, we’ll tell you plainly instead of guessing.

We’re a family-owned towing company based at 20618 Mountain Hwy E in Spanaway, and we’ve been helping folks around Pierce County since 1998. Between our flatbed, heavy duty, and lowboy work, we can handle a lot of loads that don’t fit anywhere else.

Plan Before You Move: Size, Weight, and Lift Points

The three things that matter most are how big the load is, how much it weighs, and how it can be safely lifted or pulled onto a deck. Get those right before moving day, and the rest of the job is much simpler.

A special load is only as easy to move as the information you have about it. Here’s what to figure out before you call:

  • Length, width, and height: Measure at the widest and tallest points, including anything that sticks out. A rough tape measure number is fine.
  • Weight: Look for a data plate, a spec sheet, or a bill of sale. If you’re not sure, the make and model often tell us a lot.
  • Lift and tie-down points: Many machines have marked lifting eyes or tie-down points. If yours does, take a photo.
  • Center of gravity: Is it top-heavy? Is the weight all at one end? That changes how it’s loaded and strapped.
  • Does it roll? Wheels, skids, tracks, or nothing at all. A load that can roll or be winched is easier than one that has to be lifted.
  • Fragile parts: Gauges, glass, control panels, or anything that can’t take strap pressure.

Photos help more than almost anything. A few pictures of the load from different sides, plus the path to it, let us see what we’re working with before the truck rolls.

Empty it and drain it when you can. Tanks, machines, and equipment should be emptied of fuel, fluids, and contents before a move whenever possible. That cuts the weight, keeps loads from shifting, and keeps spills off the road.

Oversize loads may need permits. If the load is wider, taller, longer, or heavier than the legal limits once it’s on the truck, it may need a permit, set travel times, or a pilot car. Who issues the permit depends on whether the route uses county roads, state highways like SR 7 or SR 512, or city streets. Give us the measurements early so there’s time to sort that out.

Special Load Moves Around Spanaway and Pierce County

From our shop on Mountain Highway East, State Route 7, we handle special loads across this part of Pierce County, from farms and acreage along SR 507 and in Graham to shops in Frederickson, job sites off SR 161, and routes north on SR 512 and I-5.

Special loads tend to come from the same kinds of places. Here’s where we see them most:

  • Farms and acreage along SR 507 and in Graham and Roy: Old tractors, implements, tanks, and equipment that’s been sitting in a barn or field for years.
  • Frederickson and Canyon Road East: Shops and industrial buildings moving machinery, compressors, and equipment between buildings or out to new locations.
  • Job sites along SR 161 and 176th Street East: Generators, light towers, and other site equipment between projects in South Hill, Frederickson, and Graham.
  • Pacific Avenue and Mountain Highway East (SR 7): Local businesses moving signs, displays, and equipment, plus loads heading south toward Elbe and the mountain.
  • SR 512 and I-5: Longer moves to Lakewood, Tacoma, Puyallup, and beyond.
  • JBLM: If the load is going on or off base, tell us when you call. Base access can take extra steps.

Rural pickups come with their own challenges. Long gravel driveways, low barn doors, soft pastures, and tight turns around outbuildings all change how a truck can reach a load. Pierce County’s wet months make soft ground even softer, so tell us about the path to the load, not just the load itself.

How a Special Load Gets Moved

Every special load is planned around the item itself: the right truck or trailer, a safe way to get it on the deck, secure tie-downs at strong points, a route that fits its size, and a clear plan for setting it down at the other end.

Here’s how a typical special load move goes:

  1. Plan on the phone: We go over the size, weight, photos, and both locations, and pick the right equipment.
  2. Check the site: The operator looks at the load, the ground, overhead wires, and the path in and out before anything moves.
  3. Load it: Depending on the item, it’s driven on, winched on, or lifted with equipment you have on site, like a forklift or loader. Some loads need a crane, which we’ll talk through with you ahead of time.
  4. Secure it: Chains or rated straps go to strong points, never to fragile parts. Blocking or padding keeps it from shifting or rubbing.
  5. Drive the route: The driver plans around bridges, wires, weight limits, and any permit conditions. Tie-downs get checked along the way.
  6. Set it down: At delivery, the load comes off the same careful way, onto a spot that’s firm, level, and ready for it.

Have unloading figured out at the other end. If the load needs a forklift or loader to come off the truck, make sure one is there and someone can run it. A truck that shows up with no way to unload means waiting, or a second trip.

Some loads overlap with our other services. For shipping containers and site offices, see shipping container transport and office container transport. For lifts and light machinery, see scissor lift towing and equipment transport. For unusual vehicles, see special vehicle towing.

What Affects the Cost of Special Load Transport

There’s no set price for special loads because every job is different. Size and weight, distance, how the load gets on and off the truck, permits, site access, and timing are what usually move the number.

Here’s what usually changes the price:

  • Size and weight: Bigger and heavier loads need bigger equipment and more time to secure.
  • Distance: A move across a property or across Spanaway costs less than a longer haul.
  • Loading and unloading: A load that rolls or can be winched is quicker than one that needs lifting equipment.
  • Permits and escorts: Oversize loads may add permit fees, pilot cars, or limits on when the load can travel.
  • Site access: Soft ground, tight gates, low wires, and long driveways take more time and care.
  • Wait time: If the load isn’t ready or the unloading equipment isn’t there, the clock may keep running.
  • Timing: Short-notice, weekend, or after-hours moves can cost more with many companies.

Before you hire anyone, it’s fair to ask:

  • How is the price figured: flat rate, hourly, or by the mile?
  • Are loading, securing, and unloading included?
  • Are permit or pilot car costs included, or extra?
  • What could make the price change once you see the load?

We believe in fair pricing and clear communication. Whether it’s an old tractor out of a barn in Graham, a compressor leaving a shop in Frederickson, or something you’re not sure how to describe, tell us about it and we’ll give you a straight answer before our truck heads your way. Call us at 253-846-1164.

Frequently asked questions

What kinds of special loads can you move?

A lot of things that don't fit a normal tow, like machinery, generators, compressors, emptied tanks, farm equipment, small structures, and vehicles that aren't street legal. Send us the size, weight, and a few photos, and we'll tell you plainly whether it fits our equipment or needs a crane or specialized hauler.

Does my special load need an oversize permit?

It depends on its size and weight once it's on the truck. Loads over the legal width, height, length, or weight limits may need a permit, set travel times, or a pilot car. Give us the measurements early so there's time to sort it out.

Do I need a forklift or loader at the pickup or drop-off?

Sometimes. Loads that can roll or be winched can usually go on and off the truck without one. Loads that have to be lifted may need a forklift, loader, or crane at one or both ends. We'll talk it through with you before moving day.

What should I do to get my load ready?

Measure it, find its weight, and take photos of it and the path to it. Drain fuel and fluids and empty it out when you can, and point out any fragile parts or marked lift points. Clear the path for the truck and make sure someone is at both ends.

Stranded right now?

253-846-1164
Call 253-846-1164 · 24/7

Share with