Open now — 24 hours a day, 7 days a week Family owned & operated in Spanaway since 1998

Scissor Lift Towing in Spanaway

Scissor lifts and aerial work platforms.

Call 253-846-1164 Open 24 hours · 7 days
Scissor Lift Towing – Emerald Towing in Spanaway, WA

Scissor Lifts Get Hauled, Not Towed

A scissor lift isn’t built to roll down a road behind a truck. It has small wheels, a slow drive system, and no towing setup, so it has to be loaded onto a flatbed or trailer and strapped down. When people say “scissor lift towing,” what they really need is safe loading and hauling.

Scissor lifts are great on a job site and terrible on a highway. They’re made to creep along a warehouse floor or a graded lot at walking speed. Their wheels are small, many have solid tires, and the drive motors and brakes aren’t designed to be pulled.

Trying to drag one behind a truck can wreck the drive system, flat-spot the tires, and put a tall, top-heavy machine on the road with nothing holding it steady. That’s why the safe answer is always the same: get the lift onto a deck, secure it, and carry it.

Scissor lifts come in a few common types:

  • Electric slab lifts: The narrow, battery-powered lifts used indoors on smooth floors. They’re smaller, but they’re heavier than they look.
  • Rough terrain lifts: Wider machines with bigger tires and often a diesel or dual-fuel engine. These are made for gravel, dirt, and uneven job sites, and they can weigh a lot more.
  • Large deck and high-reach lifts: Bigger platforms and taller reach mean more weight and a bigger footprint on the trailer.

Scissor lifts are heavier than most people expect. Many have heavy steel bases and counterweight built in so they stay stable when the platform is raised. That weight is great for safety on the job, but it matters a lot when you’re picking a truck to haul it. Check the serial plate or the manual for the machine’s weight.

We’re a family-owned towing company based at 20618 Mountain Hwy E in Spanaway, and we’ve been helping contractors and businesses around Pierce County since 1998. Our equipment transport and flatbed service is set up for small machines like scissor lifts.

Common Reasons a Scissor Lift Needs to Be Moved

Most scissor lift moves happen because a job is changing. The lift is done at one site and needed at another, it broke down and can’t drive itself, it’s stuck on soft ground, or it was bought, sold, or needs to go back to a rental yard.

Here are the calls we see most often:

  • Moving between job sites: Your crew finished one building and needs the lift across town by morning. A lift can’t drive itself down Pacific Avenue, so it has to be hauled.
  • A lift that won’t run: Dead batteries, a hydraulic leak, or a drive motor problem can leave a lift parked where it quit. It has to be winched onto the deck and taken to a shop.
  • Stuck on soft ground: A slab lift that wandered off the concrete, or a rough terrain lift that sank in a muddy lot after a wet week, may need a careful pull before it can be loaded. See winch out service.
  • Buying or selling a used lift: A lift bought from another business or an online sale needs to get from the seller to you without damage.
  • Returning or picking up a rental: If the rental company isn’t handling delivery, or you missed the pickup window, the lift still has to get back.
  • Moving into storage: When a project wraps up, lifts often head to a yard or warehouse until the next job.

Renting? Check your agreement first. Many rental companies deliver and pick up their own lifts. A quick call to the rental company might mean you don’t need to hire anyone at all.

Scissor lifts are often part of a bigger job site move. If you also need an excavator or other heavy machine hauled, see lowboy towing and construction towing. For site offices and storage boxes, see office container transport and shipping container transport.

Scissor Lift Moves Around Spanaway and Pierce County

From our shop on Mountain Highway East, State Route 7, we reach job sites, warehouses, and rental yards across this part of Pierce County, from Pacific Avenue and the Frederickson industrial area to SR 512, I-5, and the growing neighborhoods in Graham and South Hill.

Scissor lifts work wherever there’s building going on, and there’s plenty of that around here. Here’s where we see the most lift moves:

  • Pacific Avenue and Mountain Highway East (SR 7): Retail, offices, and commercial buildings along SR 7 through Parkland and Spanaway keep lifts busy for remodels, sign work, and lighting jobs.
  • Frederickson and Canyon Road East: The industrial and warehouse buildings in Frederickson use lifts for maintenance, racking, and new construction.
  • 176th Street East and 112th Street East: These roads link Spanaway to Frederickson, South Hill, and Graham, where new homes and commercial projects are going up.
  • SR 161 through South Hill and Graham: Growth along Meridian means plenty of new commercial and retail construction.
  • SR 512 and I-5: Moves to Lakewood, Tacoma, Puyallup, and farther often run on these highways.
  • JBLM: If your lift is going on or off base, tell us when you call. Base access can take extra steps.

Height matters on the road, too. A scissor lift on a deck sits taller than you’d think, especially a rough terrain model with big tires. The platform has to be fully lowered and guardrails folded if the lift has that option, so the load clears bridges, power lines, and low branches on the way.

Wet weather plays a part here, like it does with everything in Pierce County. A rough terrain lift that drove onto a dirt pad in August can sink in by November. If your lift is sitting on soft ground, tell us so we can plan a safe way to reach it.

How a Scissor Lift Is Loaded and Secured

A running lift is driven slowly up onto a flatbed or ramp trailer with the platform fully lowered. A dead lift is winched on. Once it’s centered, it’s chained or strapped at the manufacturer’s tie-down points, never at the guardrails, platform, or scissor arms.

Loading a lift the right way protects the machine and everyone around it. Here’s how a careful load usually goes:

  1. Platform fully down: The platform is lowered all the way and the lift is set to its travel position. Loose tools and materials come off the deck.
  2. Check the ramp angle: Scissor lifts have low ground clearance and small wheels. A steep ramp can high-center the lift or make it hard to climb. A tilt deck or low-angle ramp makes this easier.
  3. Drive or winch it on: If the lift runs, it’s driven on slowly, with someone spotting. If it doesn’t, it’s winched on with the line attached to a solid point on the base.
  4. Center the weight: The lift should sit centered on the deck so the truck handles evenly.
  5. Tie down at the right points: Chains or rated straps go to the lift’s designated tie-down points, which are usually marked on the base. Nothing should be strapped over the guardrails, the platform, or the scissor arms. Those parts aren’t built to hold tie-down tension.
  6. Final check: Brakes set, controls off or locked out, and every tie-down checked before the truck pulls away.

Batteries matter for electric lifts. If the battery is completely dead, the drive and brakes may not release. Some lifts have a manual brake release for loading. Tell us if your lift won’t power on, so we can plan for it before we arrive.

At delivery, the steps happen in reverse. The drop-off spot should be firm and level, and someone should be there who knows where the lift needs to go. Take a quick walk around the lift before the driver leaves.

What to Have Ready and What Affects the Cost

A few details make the call quick and the price clear: the lift’s make, model, weight, and stowed height, whether it runs, where it’s sitting, and where it’s going. Distance, size, loading conditions, and timing are what move the cost.

When you call, try to have these handy:

  • Make and model: Or a photo of the serial plate
  • Weight: Usually on the serial plate or in the manual
  • Stowed height and width: With the platform fully down
  • Condition: Whether it drives, and whether the battery or engine works
  • Pickup spot: Indoors, on concrete, on gravel, or on soft ground
  • Access: Loading doors, gate codes, low overhangs, or tight turns
  • Drop-off: The address and a contact person at the other end

Here’s what usually moves the price up or down:

  • Distance: A move across Spanaway costs less than a long haul.
  • Size and weight: A small slab lift and a big rough terrain lift need different trucks.
  • Loading conditions: A running lift on a flat lot loads fast. A dead lift on soft ground takes more time.
  • Wait time: If the truck has to wait while a site is cleared or a gate is unlocked, that time may count.
  • Timing: Nights, weekends, and short-notice moves can cost more with many companies.

Before you hire anyone, it’s fair to ask how the price is figured, whether loading and unloading are included, and what could change the total. A good company will answer plainly.

We believe in fair pricing and clear communication. Whether your lift is at a warehouse in Frederickson, a storefront on Pacific Avenue, or a job site off SR 161, we’ll walk you through the move before our truck heads your way. Call us at 253-846-1164.

Frequently asked questions

Can a scissor lift be towed behind a truck?

No. Scissor lifts aren't built to be towed. Their small wheels, drive motors, and brakes can be damaged, and a tall lift rolling down the road isn't stable. It needs to be loaded onto a flatbed or trailer and strapped down.

Can you move a scissor lift that won't start or has a dead battery?

Yes. A lift that won't run can be winched onto the deck. Some electric lifts have brakes that stay locked without power, and many have a manual brake release for this. Tell us the lift won't power on when you call so we can plan for it.

How heavy is a scissor lift?

Heavier than most people expect. Many lifts have heavy steel bases and built-in counterweight to stay stable when raised, and rough terrain models weigh more than slab lifts. The exact weight is usually on the serial plate or in the manual, and it's the most useful number to give us when you call.

Do I need to call you if I rented the scissor lift?

Maybe not. Many rental companies deliver and pick up their own lifts, so check your rental agreement or call the rental company first. If they can't handle it, or you need it moved between sites, we can help.

Stranded right now?

253-846-1164
Call 253-846-1164 · 24/7

Share with