Need a shipping container moved?
Tell us the size, whether it's empty or loaded, and both addresses. We'll plan the right truck.
Shipping Container Transport Is a Hauling Job, Not a Tow
A shipping container has no wheels, no axles, and no hitch. It has to be loaded onto a truck built to carry it, moved, and set down on a level, prepared spot. The container’s size, whether it’s loaded, and the room at both ends decide what kind of truck can do the job.
Shipping containers are built to be stacked on ships and lifted by cranes at a port. Once they leave the port, they become storage sheds, job site lockers, workshops, and farm storage all over Pierce County. Moving one from point A to point B takes the right equipment and a little planning.
Containers come in a few common sizes:
- 10-foot containers: Small and handy for tight yards. Lighter, but still too heavy to slide around by hand.
- 20-foot containers: The most common size for home and job site storage. They fit on many roll-off and tilt-bed trucks.
- 40-foot containers: Twice as long and much harder to place. They need a longer truck or trailer and a lot more room at both ends.
- High cube containers: About a foot taller than standard. That extra height matters for clearance on the road and under trees, wires, and carports.
Most moves use a tilt-bed or roll-off style truck. The bed tilts back, and the container slides on or off at the delivery spot without a crane. Some jobs, especially heavy or loaded containers, or spots where a truck can’t tilt, may need a different setup like a flatbed with a forklift or crane at one end.
Our flatbed and heavy duty equipment handles loads like this. If your container has been turned into a site office with windows, wiring, and furniture, see our office container transport page, since those take a little extra care.
We’re a family-owned towing company based at 20618 Mountain Hwy E in Spanaway, and we’ve been helping homeowners, farms, and businesses around Pierce County since 1998.
Empty or Loaded Makes a Big Difference
An empty container is a fairly predictable load. A loaded one can weigh several times more, and the weight may be uneven. Moving an empty container is almost always easier, safer, and cheaper, so empty it first when you can.
A container’s own weight is just the start. Fill it with tools, furniture, feed, or equipment, and the weight climbs fast. That changes what truck can carry it and how it has to be loaded.
Here’s why loaded containers are harder to move:
- Weight: A loaded container may be too heavy for a tilt-bed truck to pull on or set down safely.
- Uneven loads: If the heavy stuff is all at one end, the container can tip or slide unevenly when the bed tilts.
- Shifting contents: Anything loose inside can slide during loading and the drive, damaging the container and what’s in it.
- The container itself: Older containers with rust in the floor or frame can flex or fail under a heavy load.
If you can’t empty it, tell us exactly what’s inside. Rough weight, where the heavy items sit, and whether everything is strapped down help us decide whether it can move loaded, and how. Never leave anything flammable or hazardous inside during a move.
If you do have to move a container with things in it, put the heaviest items low and near the center, strap or brace everything so it can’t slide, and close and lock the doors.
Not sure if it can move loaded?
Call with what's inside and where it sits. We'll tell you straight.
Container Moves Around Spanaway and Pierce County
From our shop on Mountain Highway East, State Route 7, we move containers between homes, farms, job sites, and businesses across this part of Pierce County, from Spanaway and Graham to Frederickson, Roy, Yelm, and the container yards near Tacoma.
Containers are everywhere around here, especially on bigger lots outside town. Here’s where we see the most container moves:
- Rural properties in Graham, Roy, and along SR 507: Larger lots and acreage make containers a popular choice for storage, workshops, and farm use. SR 507 runs southwest from Spanaway toward McKenna, Roy, and Yelm, past plenty of these properties.
- Frederickson and Canyon Road East: Businesses and job sites in the Frederickson industrial area use containers for secure storage.
- Job sites along SR 161 and 176th Street East: New construction in South Hill, Graham, and Frederickson means containers being dropped off at the start of a project and picked up at the end.
- Container yards near Tacoma: Many people buy used containers from yards and depots in the Tacoma area. SR 512 and I-5 connect those yards to Spanaway and the rest of the county.
- Homes around Spanaway Lake and Parkland: Smaller yards and tighter streets make placement planning even more important.
- JBLM moves: Military families moving in or out sometimes use containers. If the pickup or drop-off is on or near the base, tell us when you call, since access can take extra steps.
Check local rules before you place a container. Pierce County, nearby cities, and HOAs may have rules about where storage containers can sit on a property, how long they can stay, and how far they need to be from property lines. A quick check before delivery saves trouble later.
Wet weather matters here, too. A gravel driveway or field that was firm in August can turn soft by November. A loaded truck backing in to drop a container can sink if the ground isn’t solid. If your spot gets soggy, tell us so we can plan the approach.
Preparing the Drop-Off Spot
A tilt-bed delivery needs a lot of room. Plan for a long, straight approach, plenty of overhead clearance, firm ground, and a level, prepared spot with blocks or a pad under the container’s corners. Decide which way the doors should face before the truck arrives.
Most of what makes a container delivery go well happens before the truck shows up. Here’s what to check at the drop-off spot:
- Length: When the bed tilts and the truck pulls forward, it needs a long, straight stretch. A 40-foot container needs a lot more room than a 20-foot one.
- Width: Gates, fences, and gaps between buildings need to be wide enough for the truck to pass through.
- Overhead clearance: When the bed tilts up, the front of the container rises high. Watch for power lines, phone lines, tree branches, and roof eaves.
- Firm ground: The truck needs solid footing all the way in and out. Soft lawns, septic fields, and fresh gravel can give way.
- A level base: Set blocks, railroad ties, or a gravel or concrete pad under the corners before delivery. A level container keeps the doors opening and closing smoothly and keeps the floor off wet ground.
- Door direction: Decide which way the doors should face. Turning a container around once it’s on the ground is not a quick fix.
Picture this. A container gets set down neatly between the shop and the fence, but the doors face the fence because nobody decided ahead of time. Now it has to be picked back up and turned. A two-minute decision before delivery avoids a second trip.
For a pickup, the same rules apply in reverse. Clear a path, empty the container if you can, close and lock the doors, and make sure the truck can reach it from the door end or the closed end, whichever the setup needs.
Ready to plan your container delivery?
Call with the size, both addresses, and any tight spots. We'll walk you through it.
What to Have Ready and What Affects the Cost
The container’s size, condition, and whether it’s loaded, plus both addresses and any tight spots at either end, help us give you a clear price. Distance, weight, access, wait time, and timing are what usually move the cost.
When you call, try to have these handy:
- Size: 10, 20, or 40 feet, and whether it’s a high cube
- Condition: Any rust, damage, or soft spots in the floor
- Contents: Empty, or what’s inside and about how heavy
- Pickup spot: How the container is sitting and how a truck can reach it
- Drop-off spot: The address, door direction, and how the spot is prepared
- Tight spots: Gates, wires, trees, steep driveways, or soft ground at either end
- Contacts: Someone at both ends who knows the plan
Here’s what usually moves the price up or down:
- Distance: A move across a property or across Spanaway costs less than a longer haul.
- Size and weight: A loaded 40-foot container needs more truck than an empty 20-footer.
- Access: Tight spaces, low wires, or soft ground take more time and care.
- Wait time: If the container isn’t ready or the spot isn’t prepared when the truck arrives, the clock may keep running.
- Timing: Short-notice, weekend, or after-hours moves can cost more with many companies.
Before you hire anyone, ask how the price is figured, whether loading and setting the container down are both included, and what could change the total. A good hauler will answer plainly.
We believe in fair pricing and clear communication. Whether your container is headed to acreage off SR 507, a job site in Frederickson, or a backyard near Spanaway Lake, we’ll walk you through the move before our truck rolls. For other job site equipment, see our equipment transport, scissor lift, and lowboy pages. Call us at 253-846-1164.

